/ Erosion Control / 2020 Erosion Control and Geosynthetics Guide

2020 Erosion Control and Geosynthetics Guide

Parul Dubey on January 30, 2020 - in Erosion Control, specification section

This guide briefly showcases the latest Erosion Control and Geosynthetics products specified by civil and structural engineers throughout the industry. If your company should have been included in the guide, let us know by emailing jboone@v1-media.com, and we’ll add it online.



CivilGEO, Inc.

CivilGEO develops civil engineering and stormwater software that greatly speeds up an engineer’s work when performing erosion control engineering analysis. Flood studies, bridge design, dam failure, detention pond design, urban drainage and more can be analyzed and designed. Users typically save at least 50% of their engineering time using the advanced automation that the software provides. The software tightly integrates with Autodesk Civil 3D, Bentley MicroStation, as well as ESRI’s ArcGIS and ArcMap. Free demonstration versions are available for trial.

Sara Presta

sara.presta@civilgeo.com

800-488-4110

www.civilgeo.com


Contech Engineered Solutions

Contech Engineered Solutions is a leading provider of site solutions for the civil engineering industry. Contech is the only company that can provide bridge, drainage, erosion control, retaining wall, sanitary, soil stabilization and stormwater solutions on a national scale. Our product offering includes corrugated metal and plastic pipe; steel truss, metal plate and concrete arch bridges and structures; hard armor, geogrid, geotextiles, block and retaining wall systems; and stormwater detention/retention, filtration and treatment systems. Our product portfolio is based on more than a century of research and practical field experience serving the highway, drainage, sewage and site-improvement markets. To contact one of Contech’s 50 offices or 300 sales and product professionals nationwide, visit www.ContechES.com or call 800-338-1122.

Info@ContechES.com

800-338-1122

www.ContechES.com


East Coast Erosion Control

IECA Booth #201

Geosynthetics 2020 Booth #722

East Coast Erosion is a leading manufacturer of erosion blankets and turf reinforcement mats. Our main values are quality products and excellent service. We carry a full line of products, including temporary blankets, permanent blankets (TRMs), sediment devices and hydraulic mulches. The revolutionary T-Recs is our HPTRM that delivers permanent stability with an ease of installation. Our multiple facilities and international distribution allow us to quickly provide product when needed.

Diane Hitt

diane@eastcoasterosion.com

800-582-4005

www.eastcoasterosion.com


Keystone Retaining Wall Systems

Throughout the 30-plus years Keystone Retaining Wall Systems has been in business, we have become the world’s leading source of retaining wall and landscape solutions. Keystone’s products and services address soil retention, erosion control, and inventive landscape systems for commercial, municipal, transportation, residential, and industrial applications. Our interlocking systems use Keystone pultruded fiberglass pins with 6,400 psi shear strengths and time-saving design and construction options. Two Keystone structural wall systems have been widely approved for use across the country by state departments of transportation.

The Keystone brand is recognized and trusted among engineers, contractors, architects, and homeowners worldwide. Our products are available in almost every state in the U.S. and more than 35 countries. Visit our website to view our full line of products and technical resources.

John Schramm

jschramm@keystonewalls.com

952-897-1040

www.keystonewalls.com


Nedia Enterprises

IECA Booth #502

Geosynthetics 2020 Booth #800

Nedia Enterprises Inc. offers a complete line of erosion control, sediment control and bioengineered products made primarily from natural fibers. We provide innovative quality products and excellent service to customers in the erosion control and bioengineering industry. Nedia is committed to the conservation of the environment. We believe that the proper use of our erosion control products will contribute to improved environmental function as well as encourage widespread use of innovative and vegetation-friendly bioengineering techniques.

Siby Pothen

info@nedia.com

888-725-6999

www.nedia.com


Plastic Solutions-StormRAX

Plastic Solutions supplies high-quality, industry-leading trash racks, in addition to selling HDPE pipe, HDPE fittings, PVC pipe, plastic catch and drain basins, and plastic sheet goods. We have certified shop and field welders to ensure all requirements are met.

Customer satisfaction and dedication built this company, and this is what drives us. We are committed to designing environmentally friendly products for a cleaner tomorrow. Our helpful and knowledgeable staff will work hard to get you the right products for your projects.

Plastic Solutions has many distributors of private and commercial products available nationwide to help you complete your project faster, saving you time and money. For example, our line of fiberglass-reinforced, UV-stabilized HDPE trash racks will never rust, are a fraction of the weight of re-bar trash racks, easier to install and are covered by a limited one-year warranty.

Call us today and let our expert staff help solve your stormwater management needs.

Jonathan Larrick

jlarrick@plastic-solution.com

540-722-4694

www.plastic-solution.com


 PRESTO GEOSYSTEMS

IECA Booth #301

Geosynthetics 2020 Booth #525

Presto’s GEOWEB 3D soil confinement system offers flexible solutions for challenging soil stabilization problems. The 3D system strengthens and transforms fill material, improving performance in a variety of applications. For controlling erosion, the GEOWEB system’s 3D cellular structure stabilizes the upper soil layer on slopes to resist sliding and prevent surface runoff erosion. In channel designs, the system controls stormwater and replaces expensive riprap and reinforced concrete with vegetation and poured-in-place concrete. Vegetated gravity and reinforced GEOWEB retaining walls are designed for natural aesthetics and to meet green initiatives. Using the GEOWEB system to build roads with onsite, low-quality fill reduces cost and installation time.

Presto offers free project evaluations, fast and easy specification tools, and engineering consultation.

HDPE GEOWEB. Strength and Flexibility Perfected.

Katie Bocskor

Katie.bocskor@prestogeo.com

800-548-3424

www.prestogeo.com


 Propex

IECA Booth #701

Geosynthetics 2020 Booth #503

Propex GeoSolutions is a global leader in innovating patented geosynthetic and erosion control products that are tested, proven and trusted. We don’t just manufacture and market these innovative products, we also have an experienced team of professional engineers to support you through the design process including creating a unique design for your project that meets specifications. We’ll also support your installation efforts through our certified installer program.

Interested? Try out EC Design, our web-based erosion control modeling application that uses Hydraulic Engineering Circular No. 15 (HEC-No25) and Revised Universal Soil Loss Equation (RUSLE) to help you choose the best solution for your project.

GeoEngineering@propexglobal.com

423-553-2465

www.propexglobal.com


 TenCate Geosynthetics

IECA Booth #1006

Geosynthetics 2020 Booth #707

MOISTURE IS THE THREAT OF ROADWAY & CIVIL STRUCTURE DURABILITY

Accelerates the deterioration of assets, increases financial loss, drains time and resources, and impacts funds that could be used for new projects.

TenCate Mirafi H2Ri is a revolutionary continuous moisture management system for base course reinforcement and subgrade stabilization of Transportation, Site Development, and Energy Infrastructure projects such as roads, railways, and airports.

Meghan Strickland

spec@tencategeo.com

706-693-2226

www.tencategeo.us



ACF Environmental

The new and improved GrateMaster – GrateMaster Type F is now available. This reusable catch basin insert features improved overflows and adjustable frames, more cost-effective pricing and simplified installation and maintenance. Optional X-TEX filter booms can be attached when hydrocarbons are present. Stop by booth #408 at IECA to see the unit in person.

In addition to this new unit, ACF Environmental has been working with various localities on custom inlet protection units that meet their specific stormwater management goals and maintenance needs. For more information on how our product development and project design team can assist you, reach out to our Director, David Kelley.

info@acfenv.com

800-448-3636

www.acfenvironmental.com


Advanced Drainage Systems

HP Storm is a high-performance polypropylene pipe for gravity-flow storm drainage applications.
HP Storm is the perfect choice when premium joint performance and/or greater pipe stiffness is required. HP Storm couples advanced polypropylene resin technology with a proven, dual-wall profile design for superior performance and durability. The smooth interior wall offers additional strength as well as superior flow. HP Storm has an extended bell that adds an additional factor of safety within each joint. This innovative product meets or exceeds typical standards for pipe stiffness and joint integrity and meets ASTM F2881 and AASHTO M330 for the respective diameters. HP Storm pipe is approved for use by the Army Corps of Engineers, FAA, and AREMA. For more information, visit our website at www.ads-pipe.com.

Tori Durliat

tori.durliat@ads-pipe.com

419-424-8275

www.ads-pipe.com


American Excelsior Company

American Excelsior Company invented the erosion control blanket! Made in the USA and celebrating over 130 years in business, American Excelsior manufactures a wide variety of erosion and sediment control products.

Curlex engineered fibers are made from 100% natural Aspen fibers and harvested from sustainable sources. Recyclex based products keep millions of soda bottles out of landfills. The NEW TriNet TRM family of products are designed to work in extreme applications. Curlex Sediment Log and Curlex Bloc products provide sediment control and have countless shoreline and water filtration applications. Bindex hydraulic mulch and a variety of straw and straw/coconut products round out our offering.

With locations and distribution partners throughout the United States, we make it easy for you to address your local jobsite requirements.

ccs@americanexcelsior.com

800-777-SOIL

www.curlex.com


BECK America

BECK America is the North American distribution arm for the vast range of tools and fasteners manufactured by the BECK Group, a company with over 110 years of experience providing products of consistent, superior quality. Products include SCRAIL fasteners that combine the speed of nail installation with the strength of screws, plus the 2019 PTIA award-winning cord-free F70G Fence Stapler, and the SCRAIL RoofLoc Metal Roofing System, including F58 RoofLoc tools and SCRAIL SteelThread fasteners. The F CL45A Gabion Tool offers rugged design to withstand harsh conditions, and a double grip to ensure non-slip handling and reduced fatigue. When paired with the CL45 Gabion Hog Rings, you’ll be well-equipped to build erosion-controlling gabion baskets or rockfall nets with speed and efficiency.

sales@beck-america.com

800-239-8665

www.beck-america.com


CHARANKATTU COIR MFG. CO.

Established in 1925, we are one of the leading manufacturers and exporters of top-quality environment-friendly Coir geotextiles for soil erosion control: Coir stitched blanket, weed control mat and various Coco-peat products. We are a fourth-generation, world’s first ISO-9001, ISO-14001 & SA 8000 certified Coir and Jute company. We have been in the industry for 93 years, catering to the highly competitive and quality-conscious domestic as well as international markets.

CCM Coir geotextiles and CCM Coir stitched blankets are very effective in controlling soil erosion and slope protection. It is natural and biodegradable, durable for nearly 24-36 months, and helps plant growth hold the soil until the roots take over the job of soil protection. The weed-control mat is 100% photodegradable for use in weed control and moisture retention in soil. Coir peat is ideal for water retention and horticulture as a growing medium. It’s an ideal substitute for peat moss.

arun@naturalworld.in

91-478-2864601

www.naturalworld.in


GEI Works

GEI Works is a product manufacturer and distributor specializing in erosion and pollution prevention products. A few of our product solutions include turbidity curtains, stormwater management BMPs, dewatering products, secondary containment, collapsible water tanks, and erosion control materials.

We provide practical and cost-effective solutions that can be customized to address challenges that stormwater management and erosion control professionals face every day. Our Taurus dewatering and filtration product lines are proactive solutions to satisfy BMP and SWPPP requirements. Our floating Orion Boom and Triton Turbidity Curtains, designed for maximum control and containment, are versatile enough to fit specific project needs.

GEI Works leverages years of industry experience and USA manufacturing capabilities to provide effective solutions to job site challenges large and small in the United States and around the world.

Karen Allan

kallan@geiworks.com

772-646-0597

www.geiworks.com


GeoTree Solutions

GeoTree Solutions (GeoTree), a ClockSpring|NRI company, offers a wide range of highly engineered solutions designed to repair, protect, strengthen and rehabilitate critical infrastructure assets spanning the water/wastewater, oil, gas, and industrial and civil infrastructure industries. ClockSpring|NRI recently announced that its concrete solutions division, formerly Milliken Infrastructure Solutions, would now be named GeoTree.
Concrete Cloth GCCM

GeoTree’s Concrete Cloth geosynthetic cementitious composite mat (GCCM) is a revolutionary construction material that can be used in civil infrastructure markets, including transportation, oil & gas, stormwater, landfill, mining, and erosion control.

Engineered in roll form, Concrete Cloth GCCM, a licensed product of Concrete Canvas, is a three-dimensional, flexible, concrete impregnated fabric that hardens on hydration to form a thin, waterproof and fire-resistant concrete layer that can be used for ditch lining, slope stabilization, shoreline armor, secondary berm protection, culvert invert protection and geosynthetic liner protection.

Concrete Cloth GCCM can be installed in rainy and other wet conditions, virtually eliminating rescheduling due to weather, and it has a low alkaline reserve and a low wash rate for a minimal ecological impact.

John Hepfinger

jhepfinger@cs-nri.com

855-655-6750

www.geotreesolutions.com


Hanes Geo Components

Hanes Geo Components is an industry-leading supplier of erosion and sediment control products as well as geosynthetics. With more than 40 large stocking locations, we serve contractors, engineers and distributors in the United States and Canada. We deliver erosion control blankets, turf reinforcement mats, hydromulch, sediment control materials and many other products, often with our own fleet of flatbed trailer trucks.

Hanes Geo Components manufactures several E & SC products, including ScourStop transition mats, Inlet Pro sediment bags, and TerraTex dewatering bags. We make and distribute a variety of silt fences: pre-staked, wire-back, logo-printed, DOT, “super silt fence,” lathe, pocketed, etc. Our TerraTex geotextiles comply with public and private specifications. Our TerraGrid geogrids are valuable to the engineering firm, design-build construction company, public agency and developer.

Dave Snyder

dave.snyder@hanescompanies.com

888-239-4539

www.hanesgeo.com


Invisible Structures

Invisible Structures has been the industry’s trusted leader in porous paving and stormwater solutions since 1982. Designed by a Landscape Architect, our products provide practical solutions and design versatility to any project. Our products are known for their strength, durability and ease of installation. Made from 100% recycled plastic and manufactured in the USA, we are committed to quality, consistency and a mission to enhance the environment.

Sales@invisiblestructures.com

303-946-2827

www.invisiblestructures.com


LSC Environmental Products

LSC is a global manufacturer of premier products and equipment designed to address the persistent environmental challenges of erosion, odor, land reclamation, waste cover, seeding, and dust. Over 25 years ago, LSC pioneered the use of spray-applied alternate daily cover and solar-powered vent flares in the solid waste industry. Since then, they have applied their unparalleled expertise in spray-applied environmental coatings to a variety of new products, industries, and markets.

With the acquisition in 2016 of Terra Novo, Inc., who have served the erosion and sediment control industry for almost 20 years and are best known for their EarthGuard products, they are excited to offer new solutions for erosion control, soil amendment and site winterization. LSC’s product offering also includes a full line of specialty mixer/spray applicators.

sales@lscenv.com

800-800-7671

www.lscenv.com


Maccaferri

Maccaferri is a global leader of civil and geotechnical engineering applications that helps consultants, agencies and contractors with “Engineering a Better Solution.” Having invented the gabion and Reno Mattress over 140 years ago, Maccaferri developed a double-twist wire mesh for hydraulic applications, including erosion protection and channel lining. In the last 20 years, we have expanded our expertise to include rockfall mitigation, coastal protection and geosynthetic solutions. We strive to build partnerships through trust and collaboration within our industry community across the United States.

Justina Simmons

j.simmons@maccaferri.com

301-223-6910

www.maccaferri.com/us


Modular Gabion Systems

Modular Gabion Systems (MGS) is a division of Houston-based C.E. Shepherd Co. L.P., a leader in welded wire mesh GABION manufacturing since 1957. The Gabion System is known worldwide as an ancient and the most effective hard-armor system used in the practice of soil erosion control, earth retention, flood control, channel and river stabilization, shoreline protection, and a variety of other applications. Interconnected and rock‐filled, Gabions are engineered to provide the unique combination of flexibility, permeability, strength and integrity. Modular Gabions are fabricated in a variety of mesh openings, wire diameters and wire coatings ranging from Galvanized to Zinc‐Aluminum to Fuse Bonded PVC to Stainless Steel.

George Ragazzo

gragazzo@gabions.net

251-422‐3536

www.gabions.net


Muscle Wall

Muscle Wall is an erosion control solution that replaces sandbags, silt fencing, and other unreliable and archaic solutions. Muscle Wall is quick, easy, reusable, reliable, and customizable. Muscle Wall can also be set up very rapidly for short-term protection of individual buildings and infrastructure. Muscle Wall is an extremely versatile product that has many non-flood applications when floodwater is not a threat. Visit www.musclewall.com for more information or call 435-213-9253 to connect with a Muscle Wall team member.

Tyler Searle

tyler@musclewall.com

435-213-9253

www.musclewall.com


North American Green

North American Green develops, produces, and distributes a complete line of high-quality erosion and sediment control systems to meet the specific erosion control, sediment control, scour protection and/or vegetation reinforcement needs of nearly any application. Our integrated erosion control solutions offer multiple options for protecting high-scour areas, topsoil, construction perimeters, stormwater runoff, sediment migration and more. North American Green also provides value-added services that include design software, site evaluation and installation guidance. In addition, North American Green’s Ultimate Assurance Guarantee is the most comprehensive product-performance guarantee in the industry.

Jill Pack

jpack@nagreen.com

800-772-2040

www.NAGreen.com


OWENS CORNING

OWENS CORNING, a Fortune 500 company for 65 consecutive years, manufactures RhinoMat polyethylene Reinforced Composite Geomembranes (RCG), specifically designed for use in water retention and containment applications. The durable, stress crack resistant, lightweight construction provides outstanding performance in many different climates and environmental conditions. The UV-resistant SurFlex technology provides excellent welding characteristics, reduces stress cracking and makes it easy to seam in the factory or field for fast installation. The inner woven core layer provides dimensional stability with impressive tensile and tear strength with all layers containing UV protection. Non-toxic, no PVC or other hazardous materials used in the construction of the geomembrane. RhinoMat is a smart alternative to HDPE for many applications. Weld Easier. Install Faster. Contain Better.
Katie Hill

katiehill@owenscorning.com

800-567-9727

www.owenscorning.com/geosynthetics


PROFILE Products

Based in Buffalo Grove, Ill., PROFILE Products manufactures and distributes proven solutions that help you thrive in a competitive environment while enhancing the natural environment. As the world’s largest manufacturer of hydraulically applied erosion control products, it’s our mission to elevate the excellence of the erosion control industry through advanced technologies, onsite consultation, educational seminars and online tools and resources.

The latest in online resources from Profile, ErosionControlSpecs.com is a powerful new tool for erosion control and reclamation professionals. This free and easy-to-use specification-drafting website delivers the most up-to-date CSI formatted specifications in minutes. With simple step-by-step instructions and the ability to customize specs for your needs, ErosionControlSpecs.com gives you quick, comprehensive specifications in an editable document delivered right to your inbox.

Adam Dibble

info@profileproducts.com

847-215-1144

www.profileproducts.com


RYMAR Waterworks Innovations

RYMAR Waterworks Innovations (formally SW Products) produces Game Changing Stormwater and Erosion Control products and tools. The Marlee Float skimmer, an innovation in Stormwater Management, is the MOST effective and affordable skimmer on the market. Its unique, patented design has a shielded weir to prevent clogging, and draws water from just below the surface, which keeps floating trash and debris in the basin while increasing sediment trapping efficiency. Constructed of HDPE pipe, this polyethylene float is UV-resistant and virtually indestructible, with no moving parts. It’s third-party tested, ships pre-assembled, and is easy to install. The Roper Wrench is a Multi-Valve key with a patented Self-Centering Socket Tool designed to easily lock onto a 2” nut with a simple twist. The Versa Wattle is an inlet protection device that can also be used for trapping sediment and diverting water.

info@RYMARwaterworks.com

855-697-9333

www.RYMARwaterworks.com


Seaman Corporation

Seaman Corporation is a manufacturer of high-strength geomembranes used in transportation applications for the protection of EPS foam. Other applications include stormwater impoundment lining and floating diversion baffles. All products are manufactured in the USA.

The 9832G XR-5 Geomembrane is placed over structural lightweight EPS foam blocks where protection is needed against hydrocarbons, including highway, airfield, and rail applications. The membrane is highly resistant to the effects of water, hydrocarbons, and sunlight, and is considered the most puncture-resistant, lightweight product for the application. Prefabrication allows the contractor to minimize installation time and because the 9832G is fabric reinforced, it withstands installation handling concerns against dragging and overburden placement.

Contact Seaman Corporation for suppliers throughout North America.

Felon R. Wilson

fwilson@seamancorp.com

330-202-5902

www.xrtechnology.com


TYPAR Geosynthetics

At TYPAR Geosynthetics, we create performance-based replacements for building staples like stone, sand and asphalt. Our products are lighter and easier to install than their mineral counterparts, reducing materials required, waste created and the need for heavy construction equipment. With product and research facilities in Nashville, Tenn., we’ve built upon 40-plus years of experience to extend our range of materials to provide protection, reinforcement, drainage, filtration and separation options to design and construction professionals.
From permeable driveway surfaces, tree root-friendly barriers that protect underground structures or a reinforcement wall system that holds back flood waters, TYPAR Geosynthetics can meet application requirements and extend the life of projects.

Keith Misukanis

KeithMisukanis@berryglobal.com

www.typargeosynthetics.com

Comments are disabled