/ News / New PU Injection Resin Pushes Itself into the Crack

New PU Injection Resin Pushes Itself into the Crack

Parul Dubey on August 21, 2019 - in News, Products

Antwerp (Belgium), 21 August 2019 – TRADECC expands its product portfolio with the introduction of PC® Tunnelinject 2K 6822 LV. This very low viscous, fast reacting, two-component polyurethane injection resin uses the principle of self-injection to push itself further in the crack. The resin is ideal for the consolidation of soil and water sealing of structures with high water flow or pressure, often encountered in tunneling. In wet structures it increases 8 to 10 times in volume and forms a very strong polyurethane foam. In dry structures the product forms a solid mass. When the injection resin is completely cured, PC® Tunnelinject 2K 6822 LV becomes completely watertight and reinforces the treated structure.

The benefits of PC® Tunnelinject 2K 6822 LV are numerous. The resin has a very low viscosity (175 mPas average at 20 °C) that seals even the finest cracks. When it reacts in a solid mass without the presence of water, it has a compression strength around 70 MPa. The strong foaming ensures that less resin needs to be injected to seal voids and cracks. And finally, the product reacts in contact with water via a pumping effect. As a result, the resin pushes itself deeper into the porous rock or concrete structure that needs to be reinforced.


  • Sealing water leakages with high water ingress in shafts, tunnels, dams, canals, mines, …
  • Soil consolidation when encountering high water flow/pressure during excavation of  shafts, tunnels, dams, canals, mines, …
  • Stabilization and water sealing of deep drill holes, porous rocks, sand, ground, brick and concrete constructions
  • Void filling


PC® Tunnelinject 2K 6822 LV is available worldwide. Contact TRADECC or your distributor for more information.

About TRADECC nv

Founded in the 1990’s, as part of the ECC group, TRADECC nv is responsible for the worldwide sales of in-house developed innovative construction chemicals based on PU, acrylic and epoxy for water sealing, waterproofing, structural repair, soil stabilization, tunneling and coatings. TRADECC excels in waterproofing of construction joints, injection resins for water sealing and soil stabilization, repair mortars, carbon fibre materials for the reinforcement of structures and polyurea coatings. From its head office in Antwerp, Belgium, TRADECC serves carefully selected distributors and applicators worldwide with high-quality products and services. All materials are developed according to strict European quality norms and are therefore used in major underground infrastructure projects around the world. For more information: www.tradecc.com

Comments are disabled