Specification Section: 2018 Bridge Products and Bridge Design Software
Bridge products and bridge software include tools to analyze bridge performance, bridge building materials, structural steel design software, concrete analysis software, fabrication services, steel detailing software and more.
This brief listing is meant to introduce readers to manufacturers and suppliers with contact details to immediately access further information. If your company should have been included, let us know at firstname.lastname@example.org, and we’ll add it online.
Acrow Bridge has been serving the transportation and construction industries for more than 60 years with a full line of modular steel bridging solutions for vehicle, rail, military and pedestrian use. Acrow’s extensive international presence includes its leadership in the development and implementation of bridge infrastructure projects in over 80 countries, covering Africa, Asia, the Americas, Europe and the Middle East. For more information, please visit www.acrow.com.
American Galvanizers Association
IBC Booth #421
The American Galvanizers Association (AGA) is a not-for-profit trade association dedicated to serving the needs of specifiers, architects, engineers, contractors, fabricators and hot-dip galvanizers throughout North America. Since 1933, the AGA has provided information on the most-innovative applications and state-of-the-art technological developments in hot-dip galvanizing for corrosion control.
The AGA provides many tools for specifiers, including PDF publications, a continuing education series, a quarterly email newsletter and an online Life-Cycle Cost Calculator (LCCC). All of these tools and more can be found at www.galvanizeit.org. The AGA, along with International Zinc Association and 13 galvanizer companies, also provides information on galvanized rebar. Galvanizedrebar.com features design and performance data specific to galvanized reinforcing steel in concrete. Visit us at the International Bridge Conference in booth 421!
Advitam-Sixense provides a distinct spread of tools that improve knowledge of infrastructure condition through asset management software, sensor technology and instrumentation as well as nondestructive testing. Our integrated solutions unify inspections and monitoring data to optimize infrastructure management and decision processes. ScanPrint® is our software that optimizes bridge and asset inspections as well as management of any infrastructure. EverSense® systems are turnkey instrumentation deliveries used for monitoring anything from a single bridge to large infrastructure networks. EverScan® is a unique portfolio of nondestructive measurement methods focusing on cable and post-tensioned structures.
Applied Bolting Technology
Applied Bolting Technology produces DuraSquirt DTIs (Direct Tension Indicators) that supply a bright orange indication when bolts have been tensioned, making tight bolts easy to see. DuraSquirt DTIs economize steel erection and modularization while adhering to RCSC/AISC structural bolting specifications. Visit our website to learn what Bechtel, Fluor, CB&I, Kiewit and PCL already know.
Atlas Tube is the leading producer of steel HSS in North America, delivering the shortest cycle times and the largest size range in the industry. We roll most sizes of A1085 HSS every three weeks or less, and complete details can be found at atlastube.com/astm-a1085. Now in stock at service centers in the western United States, there’s no reason not to spec A1085 HSS, the industry’s strongest support for your projects! Atlas HSS are available in squares up to 20” and 0.188”-0.875” wall thickness, rectangles up to 24” x 12” and 0.188”-0.750” wall thickness, and rounds up to 20” and 0.188”-0.625” wall thickness. Contact Atlas Tube to speak with our structural engineer and learn more about ASTM A1085 HSS.
Anticipate issues and assess information throughout your project with BIM. Design and build bridges and tunnels with better predictability and less rework. During design, preferred options can be engineered; essentially building the project in a virtual environment, developing advanced visuals and even simulating performance.
Autodesk Inc. is a leader in 3D design, engineering and entertainment software, and develops the broadest portfolio of 3D software for global markets, including tools for the AEC industry. The Architecture, Engineering & Construction Collection gives you the broadest portfolio of software and cloud technologies so you can design higher-quality and more-sustainable projects and deliver more-scalable, resilient civil infrastructure.
Bentley Systems – BRIDGE
IBC Booth #242
Address modeling, design, analysis and detailing of all bridge types on both existing and new structures with Bentley’s wide range of integrated bridge applications. Experience enriched problem solving at every stage of the project delivery process, from planning, design and engineering to construction simulation and analysis. Your result: remarkably better-engineered bridges. Develop intelligent 3D parametric bridge models within the context of an overall transportation project using OpenBridge Designer for rapid and iterative design. Integrate with civil design applications to access civil data to see how your project interacts with alignment, terrain, drainage and surrounding structures.
Bentley Systems – ContextCapture
ContextCapture is Bentley Systems’ reality modeling software that can quickly produce 3D models of existing conditions for infrastructure projects of all types, derived from simple photographs and/or point clouds. Without the need for expensive or specialized equipment, ContextCapture enables users to quickly create and use these highly detailed 3D engineering-ready reality meshes to provide precise real-world context for design, construction and operations decisions throughout the lifecycle of projects. Project teams can easily and consistently share reality modeling information—consumable and accessible—on desktop and mobile devices in many formats, including native use within MicroStation for use in any engineering, operations, maintenance or GIS workflow.
For additional information, visit www.bentley.com/ContextCapture.
Bentley Systems – STRUCTURAL
Efficiently model, analyze and design any structure—from a single foundation to an entire stadium—using various concrete, steel and joist building materials with Bentley’s most-modern applications. Consider multiple design alternatives quickly and early in your structural design process and produce high-quality and economical designs with ease. It’s easy to synchronize model data with confidence among your entire design team, including detailing 3D models for all of your structural projects using Bentley’s RAM and STAAD structural applications. Any structure. Any material. Anywhere. www.bentley.com
OpenRoads Designer CONNECT Edition, the successor to Bentley’s industry-leading civil engineering brands InRoads, GEOPAK, MX and PowerCivil, is a truly innovative design application built to address the demands of today’s evolving infrastructure industry. By blending traditional engineering workflows for plan, profile and cross-sections with 3D parametric modeling, OpenRoads Designer enables the model-centric creation of all your design deliverables while supporting all aspects of a detailed roadway design, including survey, geotechnical, drainage, subsurface utilities, corridor modeling, analysis and quantification. It is a comprehensive, multi-discipline 3D modeling application that advances the delivery of roadway projects from conceptual design through construction. OpenRoads Designer provides the latest technology and tools you need to efficiently design, model and produce project deliverables in a dynamic, interactive and parametrically enabled environment.
Founded in 1962, Bull Moose Tube boasts more than a half-century of steadfast commitment to serving customers requiring steel pipe and tube. One key contributor to our quality is our unique manufacturing method.
Bull Moose forms tube directly from steel coil, eliminating a mother tube or prior stage process. This approach enables us to start with only the highest-grade steel, create less scale, form sharper corners, craft the straightest tube, and make the most consistent welds.
Unique products include our 110 KSI Stratusteel™ tube: the strongest, lightest tube in the market. Our seven manufacturing facilities in North America help ensure consistent product availability, while our sales team maintains straightforward and transparent business practices for consistent reliability. Choose Bull Moose for exceptional strength.
Contech Engineered Solutions
IBC Booth #422
Contech Engineered Solutions provides a comprehensive array of plate, precast and truss structures, with the best-known brands available worldwide. Contech bridges—vehicular and pedestrian—fit a wide variety of applications, spanning distances from five to 300 feet and more. These bridge brands include Contech Structural Plate, BridgeCor® CON/SPAN®, BEBO®, Continental®, Steadfast® and EXPRESS® bridges.
Experience, innovative thinking and exceptional service have put more than 80,000 Contech bridge installations on the map worldwide.
The Contech Engineered Solutions’ team of Bridge Consultants is dedicated to providing the highest level of customer service, project management and consultative support. Contech supports clients throughout the entire design process, from concept to installation.
For all your bridge needs, call 800-338-1122 or visit our website: www.conteches/bridges.com.
Carl Stahl DécorCable
Carl Stahl DécorCable offers a comprehensive range of cable, rod and mesh systems for architectural, structural and design applications. Part of the global Carl Stahl Group, we are uniquely able to furnish the resources necessary for a successful project, no matter what its complexity or location. Specialized design services including tensile engineering, statics and 3-D modeling are available.
We are also proud to offer many products manufactured at our plant in Burr Ridge, Ill., that conform to domestic content and “Made in USA” requirements.
Our X-TEND® stainless-steel cable mesh is available in various mesh widths and cable diameters, including code-compliant, climb-resistant options. X-TEND® offers extremely high load capacity and has the unique ability to accommodate 3-D shapes, giving you amazing design flexibility.
E.T. Techtonics (A Creative Pultrusions Product Line) has been at the forefront in the research, design and construction of Fiber-Reinforced Polymer (FRP) composite bridges and building systems.
Our lightweight and maintenance-free bridges and boardwalks are shipped unassembled and, using standard hand tools, can be easily erected on environmentally sensitive sites. Bridge sizes range from 10’ to 100’ long by 2’ to 15’ wide. The structures’ earth-tone green is aesthetically pleasing, blending beautifully into most landscapes. We supply fiberglass pedestrian and equestrian bridges to national, state and local park systems in addition to commercial and private clients.
Fyfe Company designs and manufactures the Tyfo® strengthening system, which is used extensively to strengthen transportation infrastructure, including bridges. The Tyfo® system can increase load ratings, rehabilitate corroded or distressed members, extend service life, and maintain the appearance and overall aesthetics of historic bridges.
Most owners and engineers follow industry protocols that require fiber-reinforced polymer (FRP) installations be performed by contractors certified by the respective materials manufacturer. Fyfe’s certified applicators are experienced contractors and meet important quality standards to ensure successful installations.
The Fyfe network of certified applicators is ever-growing, and quality contractors are encouraged to learn more about the program. Contact us for more information on becoming a certified applicator.
Hayward Baker is North America’s leader in geotechnical solutions, and can reduce the construction cost and schedule for transportation-sector projects such as airports, subways and light rails, roadways and highways, bridges, terminals, and tunnels. Our solutions not only provide these construction benefits, but also protect transportation infrastructure from distress to extend the service life.
We match our solutions to the project requirements, and respond quickly and efficiently to urgent needs, including slope failures, sinkholes and other occurrences that affect operations. Safety and quality are an inherent part of everything we do. With Hayward Baker onsite, you have confidence that your transportation operations will be in service as soon as possible.
Hexagon – PPM
For over 40 years, GT STRUDL has been trusted and used globally by thousands of engineers to quickly and efficiently deliver accurate results. It is a market leader in its field for high-quality results, proven reliability and depth of technical support. The software has a proven track record in a variety of applications such as nuclear and conventional power generation, onshore and offshore facilities, marine, civil engineering, and infrastructure.
For over 25 years, ITT Enidine has been supplying highly engineered energy absorption components for protecting high-value infrastructure assets. Our viscous dampers are hydraulic devices that dissipate the kinetic energy of seismic events and cushion the impact between structures. They are versatile and can be designed to allow free movement as well as controlled damping of a structure to protect from wind load, thermal motion or seismic events. Available in ratings up to 1,000 KIP, seismic dampers are well suited for large displacement and/or large load applications such as bridges, buildings and large structures, offering the ultimate in protection. Contact us today to learn more about our full line of infrastructure protection products.
Jenik was founded in 1984 in Montreal, Canada. We specialize in sales and rentals of under bridge work access platforms and bucket trucks suitable for all types of work relating to bridge inspection, construction, repair, and maintenance in Canada for over 15 years and now expanding operations in the United States. Our rental fleet includes Jenik, Barin, Moog, Hydra Platform and Aspen Aerials. Our equipment complies with ANSI Standards. Our professional team will assist you in meeting your under bridge access requirements.
For monitoring professionals who need to quickly understand and react to complex demands of today’s monitoring projects, Leica GeoMoS is a solution that provides needed flexibility to their projects. With scalable software, options and various licensing packages, Leica GeoMoS family adapts to specific needs of any user. Suitable for continuous or periodic projects, a complete monitoring solution is offered with the highest accuracy and reliability. With more than 20 years of monitoring experience and support from a team of highly experienced engineers, Leica GeoMoS is a vital partner in a wide range of monitoring challenges.
Leica GeoMoS Imaging is an imagery extension to the existing GeoMoS solution. It is a monitoring technology that provides image-based information for documentation, inspection and detection from remote access. Live view with joystick functionality and continuous visual record on monitoring projects increases users’ productivity and gives all the necessary information for fast and easy decisions.
For industry professionals looking to scan inaccessible places and find new business opportunities, Leica ScanStation P50 is the fastest and safest, long-range 3D laser scanner. The P50 solution maximizes productivity by scanning inaccessible places at a safe position onsite, reducing time in the field with less setups. The Leica ScanStation P50 delivers highest-quality 3D data and HDR imaging at an extremely fast scan rate of 1 mio points per second at ranges of > 1 km. It’s extremely durable and performs even under the toughest environmental conditions, such as under extreme temperatures ranging from -20°C to + 50°C and complies with the IP54 rating for dust and water resistance.
The Leica Pegasus:Two vehicle-independent mobile mapping solution uses laser scanners and cameras in combination with GNSS receivers, IMUs and a DMI to acquire accurate and precise spatial data.
This innovative mobile sensor platform also collects data from additional sensors like sky or pavement assessment cameras, thermal cameras or ground penetrating radar (GPR) for underground asset mapping to leverage the concept of a multi-sensor platform, which allows you to:
• Increase your ROI by collecting more data in one pass
• Create new revenue streams by using one platform for multiple applications
• Decrease your time in the field by 30-50 percent
IBC Booth #413
Established in 1934, Lindapter designs and manufactures unique steel-to-steel connection systems, which provide a faster alternative to drilling or welding in the field. Lindapter’s Girder Clamps are ideal for use on bridges, as new steel components can be lifted into position and quickly clamped onto the existing structure using standard tools. Lindapter’s product line includes the ICC-approved Hollo-Bolt for HSS and also floor fasteners such as the Grate-Fast. Typical applications include securing reinforcing steel frames to the underside of a bridge deck, supporting pipework from the structural frame and attaching open bar grating to form maintenance walkways. Bridge projects include Manhattan, Benjamin Franklin, Alexander Hamilton, Walt Whitham and Goethals bridges. No drilling or welding results in unparalleled flexibility and time savings during installation, but also eliminates hot permits and associated costs.
LUSAS develops, markets and supports a range of finite-element analysis software products for the engineering and construction industries. LUSAS Bridge software is used for cost-effective analysis, design and assessment of all bridge types. Fundamental frequency, seismic, dynamic, nonlinear, buckling, fatigue, staged construction modelling, concrete creep and shrinkage, heat of hydration, and pre-stress/post-tensioning can all be undertaken. Cable tuning analysis, traffic load optimization to AASHTO and other codes; steel and composite deck design, soil-structure interaction analysis; and rail track-structure interaction modeling are also supported. LUSAS Civil & Structural software is used in analysis of buildings, stadia, towers, LNG tanks, docks, dams and tunnels. LUSAS is used on major projects worldwide (as well as on small-scale structural integrity work). See website for more details.
Mabey Inc. carries a broad range of solutions for temporary and permanent bridges, excavation and structural shoring, and site access. Mabey combines engineering and design expertise, quality products and personal service to solve construction and maintenance challenges.
Our prefabricated bridge systems are comprised of interchangeable, rectangular panels that pin together to form trusses that support floor beams of varying lengths. Mabey bridges can handle high volumes and multiple lanes of traffic, country road bridges, or pedestrian bridges. In emergency situations, Mabey provides a rapid response with minimal disruption to existing operations and easy installation of our adaptable, pre-fabricated parts to meet your needs. We’re proud to be your trusted source for bridge rentals, bridge replacement or new bridge construction.
MDX Software Curved & Straight Steel Bridge Design & Rating is in use by many top design firms and DOTs to design and rate steel girder bridges for compliance with LRFD, LRFR, LFD and ASD AASHTO Specifications.
Milliken Infrastructure Solutions
RenewWrap® fiber-reinforced polymer (FRP) strengthening system is an important strengthening technique in every engineer’s toolbox for concrete and masonry structures due to its high strength, stiffness and corrosion-resistant properties. This system is externally bonded to or wrapped around existing concrete or steel members to increase load capacity, correct design or construction errors, restore strength to deteriorated structures, comply with more-stringent building codes, or retrofit for extraordinary events such as earthquakes.
RenewWrap FRPs come in many strengthening forms:
• Carbon-fiber bars for near surface mounted applications
• Unidirectional fiber fabrics
• Multi-directional fabrics
• Strand sheets
• CFRP anchors
• All associated resins
MMFX Technologies, a Commercial Metals Company (CMC)
MMFX Technologies offers high-strength concrete reinforcing steels (Chro¯mX®) with varying levels of corrosion resistance. Designers utilize the high-strength efficiencies and best match the corrosion protection requirements of the structure to meet the targeted service life.
Utilizing the high strength of Chro¯mX rebar (Grades 100 and 120), designers reduce construction costs, shorten build times, resolve rebar congestion issues, enhance site safety and improve sustainability. Building codes and design guides supporting high-strength designs are available through the ACI, ICC and AASTHO.
Chro¯mX rebar’s uncoated, corrosion-resistance is derived from the steel’s chemistry and microstructure, resulting in a bar that can be handled and fabricated like conventional rebar, without the risk of damage, repair or inspection issues. CMC’s acquisition of MMFX expands product manufacturing and availability coast-to-coast—product can be purchased in truckload quantities mill direct. Fabrication services are also offered through CMC’s nationwide distributor network, making MMFX Technologies the one-stop solution for all corrosion-resistant and high-strength steel needs.
New Millennium Building Systems
IBC Booth #336
Cost-Optimized Bridge Construction
New Millennium is a nationwide provider of custom engineered and manufactured steel building systems. Our Bridge-Dek® and Rhino-Dek® systems offer flexibility for developing stay-in-place form systems used in both concrete and steel bridge structures. Contractors now have efficient methods for forming deck slabs in new construction and bridge rehabilitation projects, even in extremely aggressive environments.
Lasting Bridge Performance
Bridge-Dek® and Rhino-Dek® are manufactured in a controlled environment, fabricated from high-strength galvanized steel, and will meet your design requirements. Both systems include four standardized profiles and 18 matching rebar profiles that economically span distances up to 14 feet.
Physical design properties are calculated in accordance to the latest published edition of the American Iron and Steel Institute’s (AISI) “Specifications for the Design of Cold-Formed Steel.”
National Steel Bridge Alliance
NSBA Splice: Your Solution for Bolted Splice Design
NSBA Splice is a free design tool for plate girder bridges that allows designers to analyze various bolted splice connections to determine the most efficient bolt quantity and configuration. It removes the time-consuming task of designing and checking a bolted splice connection and simplifies the process with input and output pages, and also allows the user to explore the effects of bolt spacing, bolt size, strength and connection dimensions on the overall splice design. It is presented in a Microsoft Excel spreadsheet format, allowing users with Microsoft Excel 2010 or newer to access and use. NSBA Splice is a free download, available at www.steelbridges.org/nsbasplice.
A manufacturer/supplier of high-quality bar gratings for major capital projects around the world. Typical industry applications include commercial buildings; mining & smelting; power generating stations; oilfields & refineries; chemical plants; water treatment facilities; and pulp & paper producers.
Nucor Grating products include:
• Bar Grating (Carbon Steel, Stainless Steel, Aluminum)
• Fiberglass (FRP) Grating
RISA has been developing leading-edge structural design and optimization software for over 30 years. Our products are used by 24 of the top 25 U.S. design firms in over 70 countries around the world for towers, skyscrapers, airports, stadiums, petrochemical facilities, bridges, roller coasters and everything in between. The seamless integration of RISAFloor, RISA-3D and RISAFoundation creates a powerful, versatile and intuitive structural design environment ready to tackle almost any design challenge.
With RISA-3D’s versatile modeling environment and intuitive graphic interface, you can model any structure from bridges to buildings in minutes. Get the most out of your model with advanced features such as moving loads, dynamic analysis and over 40 design codes. Structural design has never been so thorough or easy.
Short Span Steel Bridge Alliance
The Short Span Steel Bridge Alliance (SSSBA) is a group of bridge and buried soil structure industry leaders who have joined together to provide educational information on the design and construction of short span steel bridges in installations up to 140 feet in length. SSSBA’s objective is to provide essential information to bridge owners and designers on the use of short span bridges, including:
• Free web-based design tool at www.eSPAN140.com
• Case studies
• Education on superstructure, substructure and other structural components of steel bridges
• Standardized designs and details
• Manufacturer’s options (including prefabricated and modular designs)
• Durability solutions (including information on weathering steel, galvanized steel and painting)
• Technical research
• Industry contacts
Taylor Devices, Inc.
Taylor Devices, Inc. is the world-leading designer and manufacturer of Fluid Viscous Dampers, Lock-up Devices, Shock Transmission Units, Shock Absorbers, Cable Dampers and custom Tuned Mass Damping Systems. These devices and systems are used to protect building and bridge structures from the devastating vibrations caused by earthquakes, wind, hurricanes, pedestrian activity, traffic and other vibrational disturbances.
Viscous Dampers, Shock Transmission Units and Lock-Up Devices are available in force capacities from 20 KIP to 2000 KIP and are individually tested at our world-class test facility to full force and velocity as specified for each application. We have successfully provided these devices for more than 700 structural applications throughout the world.
Taylor Devices, Inc. has third-party certification to ISO 9001, AS9100 and ISO 14001.
Geopier Foundation Company is the industry leader in providing efficient, cost-effective ground improvement solutions for the support of structures. Through continual research and development, we’ve expanded our system capabilities to meet virtually all of your foundation system challenges.
Geopier systems are preferred replacements for massive over-excavation and replacement or deep foundations, including driven piles, drilled shafts or augered cast-in-place piles. Thousands of structures, including buildings, tanks, MSE walls and embankments, around the world are supported by Geopier technologies.
Our local engineers work with you to understand your project’s geotechnical and structural needs, and to engineer a project-specific solution that keeps both performance and value in mind. With multiple Geopier systems available, ground improvement solutions can be developed for virtually any structure and any soil and groundwater condition.
Work with Region Engineers worldwide to solve your ground improvement challenges.
Topcon Positioning Systems
Topcon Positioning Systems provides superior end-to-end business solutions for the surveying and construction industries by integrating high-precision measurement technology, software and data.
At The Intersection of Infrastructure and Technology, Topcon solutions create greater efficiencies and accuracies to meet the demands of today and tomorrow for growing infrastructure needs.
The Topcon Elite Survey Suite—which includes the GT series of robotic total stations, HiPer HR GNSS receiver, FC-5000 field computer and MAGNET® software system—provides Topcon flagship geospatial products and technology in one system.
Teledyne BlueView is the leading provider of state-of-the-art compact acoustic underwater measurement and imaging solutions for defense, energy, civil engineering, transportation, and port-security applications worldwide. BlueView’s advanced sonar systems have been adopted by leading manufacturers and service providers to support mission-critical underwater operations.
More than 1,000 BlueView commercial systems have been successfully deployed on ROVs, AUVs, diver hand-held units, boat mount systems, and tripod platforms to fast become the standard in multibeam imaging sonar.
The BV5000 3D multibeam scanning sonar is an ideal tool for imaging vertical structures such as bridges, dams and harbor walls. The multibeam sonar is mechanically scanned to generate high-resolution 3D point clouds for engineers and inspectors to visualize, measure and assess a structure’s condition.
Trimble is dedicated to transforming the planning, design and construction of all types of buildings through the benefits of coordinated, rich data with tools like:
Tekla Structures: Create accurate and highly detailed information to minimize costly errors, collaborate effectively and integrate with other software packages to enable more profitable projects.
Tekla Structural Designer: Win more work and maximize profits through quick comparison of alternative design schemes, cost-effective change management and seamless BIM integration.
Tekla Tedds: Create, review and automate structural calculations with Tedds’ library of pre-written templates or create your own custom calculations to create professional and transparent project documentation every time.
To learn more about managing your structural analysis and design, high-quality construction documentation, detailing, fabrication and erection from one software provider, visit www.tekla.com.
Trimble Monitoring Solutions
Trimble Monitoring Solutions provides up-to-the-minute data on the condition and behavior of land or structures with Trimble 4D Control software and Trimble total stations. This information enables bridge owners and stakeholders to address potential problems, improve safety decisions, ensure structural integrity and future-proof their investment.
Trimble’s Monitoring solutions enable professionals to create a system for bridges of any size and scope. With options to combine Trimble instruments and Trimble 4D Control software with geotechnical sensors, users can create customized monitoring solutions. No matter the size, Trimble’s scalable monitoring solutions can meet a range of project requirements from post-processed deformation measurement to real-time automated monitoring.
IBC Booth #116
Now with seven U.S. galvanizing facilities in the Midwest, Northeast and Memphis, Tenn., combined with UK and France operations, V&S represents one of the largest galvanizing companies in the world today.
Inhouse engineering, NACE Level 3 inspection services, powder coating, wet paint (aka COLORZINQ®), packaging, transportation and shipping services. A full-serve leader in value-added services for the galvanizing industry. Lunch-time seminars for the architectural, construction and steel-fabrication communities.
Some of the largest and deepest galvanizing kettles in the industry today, with a specialized spinner operation in our Perth Amboy facility, and capability of 88’ bridge girders in our Lebanon, Pa., plant. From bridges to fasteners, engineering to design help, trucking to packaging: a true “FULL SERVE” hot dip galvanizing company.
V&S has over 30 years of proud membership with the American Galvanizers Association. During 2018, V&S will celebrate a milestone in galvanizing with small span steel bridges; between temporary, permanent, partial and complete, overseas and domestic, the V&S Galvanizing facilities will dip their 10,000th hot dip galvanized bridge.
Visit us at www.hotdipgalvanizing.com