/ Awards / Sulzer Showcases MIXPACT MixCoatT Cartridge-Based 2-Component Dispensing Systems at NACE Corrosion 2018

Sulzer Showcases MIXPACT MixCoatT Cartridge-Based 2-Component Dispensing Systems at NACE Corrosion 2018

Parul Dubey on March 19, 2018 - in Awards, Events

Sulzer Mixpac USA, Inc., the leading innovator of 2-component adhesive dispensing systems, will showcase its innovative MIXPAC™ MixCoat™ cartridge-based systems at NACE Corrosion 2018, April 15-19, 2018 at the Phoenix Convention Center, in Phoenix, Arizona. On display in Booth 555 will be three members of the MixCoat family – MIXPAC™ MixCoat™ Spray for small volume applications, touch-up and repair; MIXPAC™ MixCoat™ Manual 2-component dispenser for stripe coating and touch-up; and MIXPAC™ MixCoat™ Flex for difficult to access areas.

The MIXPAC™ MixCoat™ Spray model on display is a portable pneumatic dispense system designed for small volume applications, touch-up, and repairs. Unlike large and expensive plural component spray equipment that is difficult to transport, the MixCoat Spray system is extremely lightweight. This means it is easy and fast to set up, clean up and break down, so users lose very little time for the maintenance cycle. The system works well with challenging to apply 100 percent solid epoxies and fast set polyurethanes and polyureas. It also works well with new abrasion-resistant specialty coatings, including those with glass flake additives.

Also to be exhibited is the MIXPAC™ MixCoat™ Manual model, which is used for applying high solids epoxies and touchup. MixCoat Manual offers efficient, clean and cost optimized repair work with less waste. Unlike older drill mix systems, MixCoat Manual does not require pre-mixing or metering of components. The cartridge-based system features excellent mixing performance and improved ratio control, without the need for mixing equipment. With this system, components are kept separate until forced through the static mixer; this minimizes waste from unused coating. Users no longer need to worry about pot life. Cartridges are available for 1:1, 2:1, 3:1 and 4:1 ratios, ranging from 1500 milliliter (ML) to 940 mL.

Stop by the booth to see the MixCoat™ Flex, ideal for coating applications in areas with limited accessibility for standard spray equipment, like tanks and bilges in marine applications. It is also a good choice for stripe coating with a low pressure spray and for a variety of water/wastewater manhole applications. With its robust design, the lightweight and mobile MixCoat Flex can be placed on the ground or mounted on a wall. It offers maximum flexibility to reach into tight and angled spaces. The new dual stage trigger provides one-handed operation and can accommodate a variety of spray applications. Use the 90 degree tip for spraying tight angles and the straight tip for broader areas. MixCoat Flex can adjust to 1:1, 2:1, 3:1 and 4:1 ratios into the same dispenser; simply exchange the plunger disc to change the ratio. For more information please email Rob.rochette@sulzer.com or call (603)-244-9733.


About Sulzer Mixpac:

Sulzer Mixpac AG is one of the world’s leading manufacturers and suppliers of products and services for liquid application and mixing technology. Our customers benefit from advanced solutions for precise applications as well as one- and two-component mixing and dispensing systems. A global network ensures local knowledge and expertise. Each year the company invests 7% of revenue in research and development, and brings an average of 15 new products to market. It has registered over 1,000 patents and has obtained numerous international certifications.

As part of the Sulzer Group’s Applicator Systems Division, the Mixpac business unit is backed up by a strong international network. The company is headquartered in Switzerland.


Facts and figures of Sulzer’s Applicator Systems division


Division president:                  Amaury de Menthière

Employees:                              1596 worldwide, including 50 in research and development

Revenue in 2016:                    CHF 370 million

Industries:                               adhesives, dental, beauty and healthcare

Output in 2015:                       approx. 3.2 billion plastic components

Headquarters:                          Winterthur, Switzerland

Manufacturing locations:        Haag (CH), Eschen (FL), Bechhofen, Bamberg and Kiel (GER) Haslett (US), Newbury (UK), Salem (US), Elgin (US), São Paulo (BR), Shanghai (CN)


The Applicator Systems Division specializes in mixing and dispensing systems for the adhesives and dental markets, precision application systems for liquid color cosmetics and beauty accessories, as well as one- and two-component applicator systems for the healthcare market.

Comments are disabled